Troubleshooting the Netgear WiFi extender orange light issue has proved to be very hard for users who are experiencing it. Users have also complained about implementing every hack in existence but nothing worked for them. Due to this, they are compelled to perform Netgear WiFi extender reset. In case you are also in the same mess, then following the solutions mentioned in this post will be helpful for you. If you have developed some faith in what we are saying, let us get the ball rolling, shall we?
[Causes] Netgear WiFi Extender Orange Light Issue
1. Damaged Ethernet Cable in Use
The foremost reason why you are experiencing the Netgear WiFi extender orange light issue is that the Ethernet cable in use is damaged or it is loosely connected to the Netgear wireless range extender and the host router. Perhaps, you have a pet dog at home that has a habit of chewing and damaging the first thing it sees.
2. Devices Not Kept in Proximity
Chances are that the distance between the Netgear wireless extender and the host router is more than required. By this, we mean, the space is too much. This is making it very hard for the signals emitted by the devices to get transmitted thereby forcing the LED light located on the extender to flash orange instead of green.
3. Extender Not Kept in Ideal Place
Where exactly have you kept your Netgear wireless range extender? Is it near Bluetooth speakers, cordless phones, washing machines, baby monitors, treadmills, televisions, mirrors, fish tanks, microwave ovens, refrigerators, and aluminum studs? Well then, this is the third reason behind the Netgear WiFi extender orange light issue.
4. Technical Glitches or Hiccups
Have you noticed how many of your networking devices stop working for no apparent reason? Do you know why this happens? Well, it is because of technical glitches. This is a reason that is known to cause most issues when it comes to technical devices. We are fully assuming that it caused the one that you are experiencing right now.
5. Impartial Setup of WiFi Extender
The last reason why the LED light on your extender is flashing orange is that you messed up while setting it up. Either you skipped a step in between or you were simply not careful while carrying out the process. Whatever the reason might be, you ought to read the troubleshooting tips given in the next section to resolve the issue at hand.
[Fixed] Netgear WiFi Extender Orange Light Issue
1. Purchase a New Ethernet Cable
Troubleshooting the Netgear WiFi extender orange light issue can be commenced with a little effort from your end. It is recommended that you cross-check if the Ethernet cable connecting the networking devices is damaged or not. In case, what we are dreading is true, then purchase a new cable by stepping out of your house immediately.
2. Bring the WiFi Devices Closer
As mentioned above, too much distance between the devices is not good for their health. Considering this, you should bring them close to each other. However, do not make the mistake of keeping them too close. Why? Well because till now, their signals were not getting transmitted, now they will end up clashing.
3. Keep Signal Blockage at Bay
Changing the location of your Netgear wireless range extender is another way through which the Netgear WiFi extender orange light issue can be resolved. So, relocate your device and ensure that you are not keeping it near electronic devices, metal objects, reflexive surfaces, transmitting appliances, and thick concrete walls.
4. Reboot the Netgear Extender
The easiest way to get rid of technical glitches, i.e. another reason why you are reading this article is restarting or rebooting your networking device. To go about the process, you ought to power off your extender, unplug it from its wall socket, wait for some time, and plug it into the wall socket. Do remember to turn it on.
5. Reset the WiFi Range Extender
Despite following the tips given above, in case you are still experiencing the same issue, you are left with no other option than to reset your networking or technical device. To go about the Netgear extender reset process, you need to refer to the instructions given in the user manual of your Netgear wireless range extender.
The Conclusion
This ends the article discussing the troubleshooting tips through which the Netgear WiFi extender orange light issue can be resolved with ease. We are anticipating that after following the solutions mentioned above, you will easily be able to convert the status of the LED from orange to green. In case what we are hoping for comes true, then waste no more time sharing your feedback with your fellow readers using the comment section. We are expecting that they will like this little effort made by you.
